Skip to content
Book a demo

Solutions

Built around the work your firm already does.

The same products serve different firms in different ways. Find your kind of work, see what it uses today and how the steps run.

S-01

Engineering consultancies

MEP designers, BIM coordinators and project engineers

The problem

Layout, calculations, drawings and model checks are often done in separate steps and separate tools, and figures in a delivery can be hard to trace back.

With QVINTOS

Design in the client’s IFC model, review it before issue and answer questions from the model and the project documents, on one platform.

QVINTOS Design: the sprinkler studio with a floor plan of heads and pipes next to an X-ray 3D view of the building.
QVINTOS Design, sprinkler (available)

How the work runs

  1. 01 Prepare the model Check how well the IFC model supports each discipline and correct it before design. D-01 · Model preparation Pilot
  2. 02 Design the discipline Sprinkler today; ventilation, plumbing, heating, electrical and fire alarm in a pilot. D-02 · Sprinkler Available
  3. 03 Review before issue Clashes, room heights, penetrations, shaft space and rule checks, each with method and source. C-01 · Model review Available
  4. 04 Deliver Sheets as PDF and DXF, the model as IFC, issues as BCF. A qualified engineer confirms the result.

QVINTOS Design Model review QVINTOS Assist

S-02

Contractors

Project engineers, BIM coordinators and site management

The problem

Models arrive from several designers, conflicts between them often surface late, and answers are spread across models and project documents.

With QVINTOS

Review incoming models for clashes and rule deviations, coordinate between discipline models, and ask the model and the documents.

QVINTOS Coordinate, model review: the architect’s model in an X-ray 3D view with view presets and the storey rail.
QVINTOS Coordinate, model review (available)

How the work runs

  1. 01 Receive the models Bring in the discipline models and check that they line up with the architect’s model. C-02 · Multi-model coordination & clashes Pilot
  2. 02 Review and find clashes Review one model in depth, or find clashes between models, grouped per building element. C-01 · Model review Available
  3. 03 Raise issues Follow issues across model versions and exchange them with your coordination tool as BCF. C-03 · Issues / BCF Pilot
  4. 04 Ask the project Questions to the model and the documents, answered with their sources. A-02 · Document intelligence Available

QVINTOS Coordinate QVINTOS Assist

S-03

Building services firms

Sprinkler, HVAC and electrical designers

The problem

A system is laid out, calculated and drawn in separate passes, and every change to the building means doing the passes again.

With QVINTOS

Sprinkler design with hydraulic calculation and drawing sheets from the same run in the IFC model. The other disciplines can be tried in a pilot.

The whole building in X-ray with the designed sprinkler system: risers, mains and heads.
The designed sprinkler system in X-ray (available)

How the work runs

  1. 01 Bring the IFC model IFC4 for MEP design. Revit models come in through IFC export.
  2. 02 Place heads and pipes Heads and the pipe network in the model, storey by storey. D-02 · Sprinkler Available
  3. 03 Calculate The hydraulic calculation from the same model, every value with its rule id. D-02 · Sprinkler Available
  4. 04 Issue the sheets The drawing set as PDF and DXF, and the model with the design as IFC.

QVINTOS Design Every module

Available In use today.

Pilot Runs in production and can be tried on your project. Not yet proven on customer projects.

How a rollout runs

Bring purpose-built AI into your organization.

Book a demo All products